蒸汽消毒医疗级LDPE

蒸汽消毒LDPE，蒸汽消毒，辐射消毒，环氧乙烷消毒

 

Bormed™ LE6607-PH

低密度聚乙烯

 

Borealis AG

 

Technical Data

 

产品说明

Bormed LE6607-PH is a resin intended for evaluation for use in Healthcare applications.

 

Bormed LE6607-PH is an additive free low density polyethylene typically used in blow moulding articles. Material is characterised with a balanced in flexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6607PH can be steam sterilised at maximum 110 °C. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy.

 

Applications

Bormed LE6607-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6607-PH .

 

• Bottles for irrigation solutions 

• Ampoules for injectable solutions 

• Bottles for IV-solutions 

 

This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.

 

Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.

 

Special features

• No additives

总览

材料状态 • 已商用：当前有效

资料 1 • Technical Datasheet (English)

搜索 UL 黄卡 • Borealis AG

供货地区 • 北美洲 • 拉丁美洲 • 亚太地区

• 非洲和中东 • 欧洲

特性 • 辐射消毒 • 可回收材料 • 用蒸汽消毒

• 环氧乙烷消毒 • 无添加剂

用途 • 吹塑成型应用 • 瓶子

加工方法 • 吹塑成型

物理性能 额定值单位制 测试方法

密度 0.927g/cm³ ISO 1183

熔流率（熔体流动速率） (190°C/2.16 kg) 0.30g/10 min ISO 1133

机械性能 额定值单位制 测试方法

拉伸模量 300MPa ISO 527-1/1

拉伸应力 (屈服) 12.0MPa ISO 527-2/50

拉伸应变 (断裂) 350% ISO 527-2/50

弯曲模量 290MPa ISO 178

硬度 额定值单位制 测试方法

肖氏硬度 (邵氏 D) 52 ISO 868

热性能 额定值单位制 测试方法

热变形温度 (0.45 MPa, 未退火) 51.0°C ISO 75-2/B

挤出 额定值单位制

熔体温度 165 到 200°C

 

 

 

 

 

蒸汽消毒医疗级低密度聚乙烯,蒸汽消毒医疗级 LDPE Bormed™ LE6607-PH是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123   13549213581 肖生    QQ：15397858   微信：13549213581